1.分析LinuxUDP源码实现原理linuxudp源码
2.linux下socket 网络编程(客户端向服务器端发送文件) 求源代码 大哥大姐帮帮忙 。源码。源码谢谢
分析LinuxUDP源码实现原理linuxudp源码
Linux UDP源码实现原理分析
本文将重点介绍Linux UDP（用户数据报协议）的源码源码实现原理。UDP是源码面向无连接的协议。 它为应用程序在IP网络之间提供端到端的源码通信，而不需要维护连接状态。源码小说网站源码下载
从源码来看，源码Linux UDP实现分为两个主要部分，源码分别为系统调用和套接字框架。源码 系统调用主要处理一些针对特定功能层的源码系统调用，例如socket、源码bind、源码listen等，源码十九强源码指标使用说明它们对socket进行配置，源码为应用程序创建监听地址或连接到指定的源码IP地址。
而套接字框架（socket framework），则主要处理系统调用之后的各种功能，如创建路由表、根据报文的安卓软件怎么开源码下载地址信息创建路由条目，以及把报文发给目标主机，并处理接收到的报文等。
其中，send()系统调用主要是向指定的UDP端口发送数据包，它会检查socket缓存中是否有数据要发送，如果有，抚州即食燕窝溯源码怎么扫则将该socket中的数据封装成报文，然后向本地链路层发送报文。
接收数据的recv()系统调用主要是侦听和接收数据报文，首先它根据接口上接收到的数据报文的地址找到socket表，如果有对应的socket，则将数据报文的大屏广告投放系统源码下载数据存入socket缓存，否则将数据报文丢弃。
最后，还有一些主要函数，用于管理UDP 端口，如udp_bind()函数,该函数主要是将指定socket绑定到指定UDP端口；udp_recvmsg()函数用于接收UDP端口上的数据；udp_sendmsg()函数用于发送UDP数据报。
以上就是Linux UDP源码实现原理的分析，由上面可以看出，Linux实现UDP协议需要几层构架， 从应用层的系统调用到网络子系统的实现，都在这些框架的支持下实现。这些框架统一了子系统的接口，使得UDP实现在Linux上更加规范化。
linux下socket 网络编程(客户端向服务器端发送文件) 求源代码 大哥大姐帮帮忙 。。谢谢
server:
#include <stdio.h>
#include <errno.h>
#include <unistd.h>
#include <signal.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <netinet/in.h>
#include <syslog.h>
#include <sys/time.h>
#include <string.h>
#include <fcntl.h>
#include <sys/wait.h>
#define MAXDATASIZE
#define SERVPORT
#define BACKLOG
int SendFileToServ(const char *path, const char *FileName, const char *ip)
{
#define PORT
int sockfd;
int recvbytes;
char buf[MAXDATASIZE];
char send_str[MAXDATASIZE];
char filepath[] = { 0};
struct sockaddr_in serv_addr;
FILE *fp;
sprintf(filepath, "%s%s", path, FileName);
if((sockfd=socket(AF_INET,SOCK_STREAM,0))==-1)
{
perror("socket");
return 1;
}
bzero(&serv_addr,sizeof(struct sockaddr_in));
serv_addr.sin_family=AF_INET;
serv_addr.sin_port=htons(PORT);
inet_aton(ip, &serv_addr.sin_addr);
int IErrCount = 0;
again:
if(connect(sockfd,(struct sockaddr *)&serv_addr,sizeof(struct sockaddr))==-1)
{
if (5 == IErrCount)
return 1;
IErrCount++;
perror("connect");
sleep(2);
goto again;
}
//if ((fp = fopen(FileName, "rb")) == NULL)
if ((fp = fopen(filepath, "rb")) == NULL)
{
perror("fopen ");
return 1;
}
recvbytes = write(sockfd, FileName, strlen(FileName));
recvbytes = read(sockfd, buf, MAXDATASIZE);
if (!memcmp(buf, "sendmsg", 7))
{
while(fgets(send_str, MAXDATASIZE, fp))
{
recvbytes = write(sockfd, send_str, strlen(send_str));
recvbytes = read(sockfd, buf, MAXDATASIZE);
if (recvbytes <= 0)
{
fclose(fp);
close(sockfd);
return 1;
}
if (memcmp(buf, "goon", 4))
{
fclose(fp);
close(sockfd);
return 1;
}
}
recvbytes = write(sockfd, "end", 3);
}
else
{
fclose(fp);
close(sockfd);
return 1;
}
memset(buf, 0, MAXDATASIZE);
if (read(sockfd, buf, MAXDATASIZE) <= 0)
{
close(sockfd);
return 2;
}
char *Eptr = "nginx reload error";
//printf("bf[%s]\n", buf);
int ret;
ret = strncmp(buf, Eptr, strlen(Eptr));
//printf("%d\n", ret);
if (!ret)
{
close(sockfd);
return 2;
}
close(sockfd);
return 0;
}
int mysyslog(const char * msg)
{
FILE *fp;
if ((fp = fopen("/tmp/tmp.log", "a+")) == NULL)
{
return 0;
}
fprintf(fp, "[%s]\n", msg);
fclose(fp);
return 0;
}
static void quit_handler(int signal)
{
kill(0, SIGUSR2);
syslog( LOG_NOTICE, "apuserv quit...");
// do something exit thing ,such as close socket ,close mysql,free list
// .....
//i end
exit(0);
}
static int re_conf = 0;
static void reconf_handler(int signal)
{
re_conf=1;
syslog(LOG_NOTICE,"apuserv reload configure file .");
// 请在循环体中判断，如果re_conf == 1，请再次加载配置文件。
}
static int isrunning(void)
{
int fd;
int ret;
struct flock lock;
lock.l_type = F_WRLCK;
lock.l_whence = 0;
lock.l_start = 0;
lock.l_len = 0;
const char *lckfile = "/tmp/apuserv.lock";
fd = open(lckfile,O_WRONLY|O_CREAT);
if (fd < 0) {
syslog(LOG_ERR,"can not create lock file: %s\n",lckfile);
return 1;
}
if ((ret = fcntl(fd,F_SETLK,&lock)) < 0) {
ret = fcntl(fd,F_GETLK,&lock);
if (lock.l_type != F_UNLCK) {
close(fd);
return lock.l_pid;
}
else {
fcntl(fd,F_SETLK,&lock);
}
}
return 0;
}
int MyHandleBuff(const char *buf, char *str, char *FileName, char *pth)
{
sscanf(buf, "%s %s %s", pth, FileName, str);
printf("path=%s\nfilename=%s\nip=%s\n", pth, FileName, str);
return 0;
}
int main(int argc, char **argv)
{
int sockfd,client_fd;
socklen_t sin_size;
struct sockaddr_in my_addr,remote_addr;
char buff[MAXDATASIZE];
int recvbytes;
#if 1
int pid ;
char ch ;
int ret;
int debug = 0;
signal(SIGUSR1, SIG_IGN);
signal(SIGUSR2, SIG_IGN);
signal(SIGHUP, SIG_IGN);
signal(SIGTERM, quit_handler);
syslog(LOG_NOTICE,"apuserver start....");
while ((ch = getopt(argc, argv, "dhV")) != -1) {
switch (ch) {
case 'd':
debug = 1;
break;
case 'V':
printf("Version:%s\n","1.0.0");
return 0;
case 'h':
printf(" -d use daemon mode\n");
printf(" -V show version\n");
return 0;
default:
printf(" -d use daemon mode\n");
printf(" -V show version\n");
}
}
if (debug && daemon(0,0 ) ) {
return -1;
}
if (isrunning()) {
fprintf(stderr, "apuserv is already running\n");
syslog(LOG_INFO,"apuserv is already running\n");
exit(0);
}
while (1) {
pid = fork();
if (pid < 0)
return -1;
if (pid == 0)
break;
while ((ret = waitpid(pid, NULL, 0)) != pid) {
syslog(LOG_NOTICE, "waitpid want %d, but got %d", pid, ret);
if (ret < 0)
syslog(LOG_NOTICE, "waitpid errno:%d", errno);
}
kill(0, SIGUSR2);
sleep(1);
syslog(LOG_NOTICE,"restart apuserver");
}
signal(SIGHUP, reconf_handler);
signal(SIGPIPE, SIG_IGN);
signal(SIGUSR1,SIG_IGN);
signal(SIGUSR2, SIG_DFL);
signal(SIGTERM, SIG_DFL);
#endif
if((sockfd=socket(AF_INET,SOCK_STREAM,0))==-1)
{
perror("socket");
exit(1);
}
bzero(&my_addr,sizeof(struct sockaddr_in));
my_addr.sin_family=AF_INET;
my_addr.sin_port=htons(SERVPORT);
my_addr.sin_addr.s_addr = htonl(INADDR_ANY);
if(bind(sockfd,(struct sockaddr *)&my_addr,sizeof(struct sockaddr))==-1)
{
perror("bind");
exit(1);
}
if(listen(sockfd,BACKLOG)==-1)
{
perror("listen");
exit(1);
}
int nret;
while(1)
{
sin_size = sizeof(struct sockaddr_in);
if((client_fd = accept(sockfd, (struct sockaddr *)&remote_addr, &sin_size))==-1)
{
perror("falied accept");
continue;
}
memset(buff, 0, MAXDATASIZE);
recvbytes = read(client_fd, buff, MAXDATASIZE);
char str[] = { 0};
char FileName[] = { 0};
char path[] = { 0};
MyHandleBuff(buff, str, FileName, path);
if (recvbytes > 0)
{
nret = SendFileToServ(path, FileName, str);
printf("nret[%d]\n", nret);
if (1 == nret)
write(client_fd, "send file error", );
else if(2 == nret)
write(client_fd, "reload nginx error", );
else
write(client_fd, "succ", 4);
}
close(client_fd);
}
}
_________________________________________________
client:
#include <stdio.h>
#include <errno.h>
#include <unistd.h>
#include <signal.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <netinet/in.h>
#include <syslog.h>
#include <sys/time.h>
#include <string.h>
#include <fcntl.h>
#include <sys/wait.h>
#define MAXDATASIZE
#define SERVPORT
#define BACKLOG
int mysyslog(const char * msg)
{
FILE *fp;
if ((fp = fopen("/tmp/tmp.log", "a+")) == NULL)
{
return 0;
}
fprintf(fp, "[%s]\n", msg);
fclose(fp);
return 0;
}
static void quit_handler(int signal)
{
kill(0, SIGUSR2);
syslog( LOG_NOTICE, "apuserv quit...");
// do something exit thing ,such as close socket ,close mysql,free list
// .....
//i end
exit(0);
}
static int re_conf = 0;
static void reconf_handler(int signal)
{
re_conf=1;
syslog(LOG_NOTICE,"apuserv reload configure file .");
// ·1nf == 1￡′μ?
static int isrunning(void)
{
int fd;
int ret;
struct flock lock;
lock.l_type = F_WRLCK;
lock.l_whence = 0;
lock.l_start = 0;
lock.l_len = 0;
const char *lckfile = "/tmp/dstserver.lock";
fd = open(lckfile,O_WRONLY|O_CREAT);
if (fd < 0) {
syslog(LOG_ERR,"can not create lock file: %s\n",lckfile);
return 1;
}
if ((ret = fcntl(fd,F_SETLK,&lock)) < 0) {
ret = fcntl(fd,F_GETLK,&lock);
if (lock.l_type != F_UNLCK) {
close(fd);
return lock.l_pid;
}
else {
fcntl(fd,F_SETLK,&lock);
}
}
return 0;
}
int main(int argc, char **argv)
{
int sockfd,client_fd;
socklen_t sin_size;
struct sockaddr_in my_addr,remote_addr;
char buff[MAXDATASIZE];
int recvbytes;
#if 1
int pid ;
char ch ;
int ret;
int debug = 0;
signal(SIGUSR1, SIG_IGN);
signal(SIGUSR2, SIG_IGN);
signal(SIGHUP, SIG_IGN);
signal(SIGTERM, quit_handler);
syslog(LOG_NOTICE,"dstserver start....");
while ((ch = getopt(argc, argv, "dhV")) != -1) {
switch (ch) {
case 'd':
debug = 1;
break;
case 'V':
printf("Version:%s\n","1.0.0");
return 0;
case 'h':
printf(" -d use daemon mode\n");
printf(" -V show version\n");
return 0;
default:
printf(" -d use daemon mode\n");
printf(" -V show version\n");
}
}
if (debug && daemon(0,0 ) ) {
return -1;
}
if (isrunning()) {
fprintf(stderr, "dstserver is already running\n");
syslog(LOG_INFO,"dstserver is already running\n");
exit(0);
}
while (1) {
pid = fork();
if (pid < 0)
return -1;
if (pid == 0)
break;
while ((ret = waitpid(pid, NULL, 0)) != pid) {
syslog(LOG_NOTICE, "waitpid want %d, but got %d", pid, ret);
if (ret < 0)
syslog(LOG_NOTICE, "waitpid errno:%d", errno);
}
kill(0, SIGUSR2);
sleep(1);
syslog(LOG_NOTICE,"restart apuserver");
}
signal(SIGHUP, reconf_handler);
signal(SIGPIPE, SIG_IGN);
signal(SIGUSR1,SIG_IGN);
signal(SIGUSR2, SIG_DFL);
signal(SIGTERM, SIG_DFL);
#endif
if((sockfd=socket(AF_INET,SOCK_STREAM,0))==-1)
{
perror("socket");
exit(1);
}
bzero(&my_addr,sizeof(struct sockaddr_in));
my_addr.sin_family=AF_INET;
my_addr.sin_port=htons(SERVPORT);
my_addr.sin_addr.s_addr = htonl(INADDR_ANY);
if(bind(sockfd,(struct sockaddr *)&my_addr,sizeof(struct sockaddr))==-1)
{
perror("bind");
exit(1);
}
if(listen(sockfd,BACKLOG)==-1)
{
perror("listen");
exit(1);
}
char filepath[MAXDATASIZE]= { 0};
FILE *fp;
while(1)
{
sin_size = sizeof(struct sockaddr_in);
if((client_fd = accept(sockfd, (struct sockaddr *)&remote_addr, &sin_size))==-1)
{
perror("falied accept");
continue;
}
memset(buff, 0, MAXDATASIZE);
recvbytes = read(client_fd, buff, MAXDATASIZE);
sprintf(filepath, "/etc/nginx/url_rule/%s", buff);
if ((fp = fopen(filepath, "wb")) == NULL)
{
perror("fopen");
close(client_fd);
continue;
}
write(client_fd, "sendmsg", 7);
while(read(client_fd, buff, MAXDATASIZE))
{
if (!memcmp(buff, "end", 3))
{
fclose(fp);
break;
}
else
{
fprintf(fp, "%s", buff);
write(client_fd, "goon", 4);
}
}
//system("nginx -s reload");
char *Sptr = "nginx reload succ";
char *Eptr = "nginx reload error";
int ret;
ret = system("nginx -s reload");
printf("ret[%d]\n", ret);
if (ret != 0)
{
write(client_fd, Eptr, strlen(Eptr));
}
else
{
write(client_fd, Sptr, strlen(Sptr));
}
close(client_fd);
}
}
以前写的：内容忘记了。不是很复杂你可以自己看！
